OMS LINEA ESSE S.T.01/3S ED.0 REV.14 03/2017
12
2. TECHNICAL CHARACTERISTICS
Model LINEA ESSE – ESSE PLUS
Manufactured by O.M.S. S.p.A. Officine Meccaniche Specializzate
Via Dante 20/A - 35030 Caselle di Selvazzano Padova Italia
Class CLASS 1
Application parts type B
Protection level device IPX0
Protection level foot control IPX1
POWER SUPPLY
Mains voltage settings 230 Vac +/-10%
Main frequency 50/60 Hz
Network connections that comply with the rules in force in the territory.
Rated current 8A
Nominal power 1800 W
HYDRO-PNEUMATIC SUPPLIES
Pneumatic supply from 450 kPa to 650 kPa (from 4.5 to 6.5 bar)
(Consumption air 40 liters/minute)
Water supply from 200 kPa to 400 kPa (from 2 to 4 bar)
(Consumption of water 2 liters/minute)
Max. temperature 30 °C
To Next Page
Loading...
