OMS LINEA ESSE S.T.01/3S ED.0 REV.14 03/2017
36
4. SUCTION HIGH VOLUME
The equipment can be connected to a suction pump. Therefor the cuspidor is supplied with an assistant arm
(see section CANNULA HOLDER). Some suction device, can be fitted inside of the cuspidor unit.
The aspiration system consists of the following parts:
A. Filter holder (located on the column);
B. Filter;
C. Filter cap,
D. Suction Tubes, 1.5 m in length and 11 (SALIVA) and 16 mm (HIGH VOLUME) in diameter;
E. Handpiece, 11 (SALIVA) and 16 mm (HIGH VOLUME) in diameter.
VERSION WITH SPITTOON UNIT ON THE CHAIR
To Next Page
Loading...
