OMS LINEA ESSE - Page 26

To Next Page

To Previous Page

OMS LINEA ESSE S.T.01/3S ED.0 REV.14 03/2017

TURBINE

Select the instrument from its housing. Then:

• pressing pedal (A) of the foot control will enable the chip-blower;

• move the pedal A to the right to drive the instrument;

• If pedal A is pressed simultaneously while driven the instrument, the water

spray will be activated (standard configuration).

Note:

Upon request, at the time of installation, the technician can change the configuration so that

the spray can be operated without press the pedal.

MICROMOTOR

Select the instrument from its housing. Then:

• pressing pedal (A) of the foot control will enable the chip-blower; The spray

is enabled by pressing the button on doctor console.

• Move the pedal A to the right to drive the instrument; to activated the

reverse of the micromotor rotation. Press the button on doctor console

• If pedal A is pressed simultaneously while driven the instrument, the water

spray will be activated (standard configuration).

Note:

Upon request, at the time of installation, the technician can change the configuration so that

the spray can be operated without press the pedal.

Other manuals for OMS LINEA ESSE