OMS LINEA ESSE S.T.01/3S ED.0 REV.14 03/2017
31
MAIN PRESSURE WATER REGULATOR
The water pressure regulator is installed inside the cuspidor, it keeps air pressure equal while instruments are
used.
The water pressure regulator is calibrated at O.M.S. in case of technical proposed it can be changed later. This
operation must be performed by an authorized technician.
Note:
The water pressure regulator has a filter that must be annually replaced or early.
WATER FLOW TO CUP AND SPITTOON
Inside the cuspidor, is installed four solenoid valves, which contains the water filter. The tap is adjusted using a
screwdriver to reduce the water flow when turned clockwise, and increase it when turned anticlockwise:
A. NOT USED;
B. Glass Regulator;
C. Bowl Regulator;
D. NOT USED;