OMS LINEA ESSE - Page 54

OMS LINEA ESSE S.T.01/3S ED.0 REV.14 03/2017
54
WATER FLOW TO CUP AND SPITTOON
Inside the cuspidor, is installed four solenoid valves, which contains the water filter. The tap is adjusted using a
screwdriver to reduce the water flow when turned clockwise, and increase it when turned anticlockwise:
E. NOT USED;
F. Glass Regulator;
G. Bowl Regulator;
H. NOT USED;
SWIVEL ARM SPRING
The lifting friction of the doctor arm can be adjusted by the spring inside. This allows to get a perfectly balance
according to the weight of the tray, which might change according to the instruments on it. This adjustment
must be performed by an authorized O.M.S. technician.
MAIN UNIT WATER PRESSURE
The water pressure regulator is installed inside the cuspidor, it keeps air pressure equal while instruments are
used.
The water pressure regulator is calibrated at O.M.S. in case of technical proposed it can be changed later. This
operation must be performed by an authorized technician.
Note:
The water pressure regulator has a filter that must be annually replaced or early