OMT STAND.CONTROL C1 - 15 Tests and Certificates

STAND: 17.06.2019 9910_Operation_Manual_STANDCONTROL_C1_Rev1v1_EN Seite 39 von 41
15 Tests and certificates
The drive system is tested according to the following standards:
Electromagnetic compatibility (EMV-Directive 2014/30/EU):
EN 61000-6-2:2005 Electromagnetic Compatibility (EMC)
EN 61000-6-3:2007+A1 Electromagnetic Compatibility (EMC)
EN 61000-3-2:2014 Electromagnetic Compatibility (EMC)
EN 61000-3-3:2013 Electromagnetic Compatibility (EMC)
Electrical safety (low voltage directive 2014/35/EU):
EN 62233:2008 Safety of persons in electromagnetic fields
EN 60335-1:2012+A13 Household and similar electrical appliances
Internal and similar uses
Safety-related parts of controllers:
EN ISO 13849-1:2015 Safety of machinery
Safety-related parts of control systems
Performance Level “b”