To Next PageTo Next Page
Need help?Do you have a question about the Onkyo A-9010 and is the answer not in the manual?
General| Damping factor | 95 |
|---|---|
| Amplifier class | - |
| Frequency range | 10 - 100000 Hz |
| Input sensitivity | 150 mV |
| Audio output channels | 2.0 channels |
| Peak power per channel | 44 W |
| Signal-to-Noise Ratio (SNR) | 92 dB |
| Total Harmonic Distortion (THD) | 0.08 % |
| Purpose | Home |
| Product color | Black |
| Connectivity technology | Wired |
| AC input voltage | 220-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.4 W |
| Power consumption (typical) | 25 W |
| Package weight | 8200 g |
| Manual | Yes |
Weight and Dimensions| Depth | 3 mm |
|---|---|
| Width | 435 mm |
| Height | 129.5 mm |
| Weight | 6500 g |
Covers hearing loss, battery safety, wet hand usage, and general handling notes.
Details on power connection, AC fuse, and FCC compliance information.
Guidelines for cleaning, AC fuse, and recording copyright.
Highlights the amplifier's sound quality, circuitry, and key components.
Instructions for setting up the unit and operating the remote control.
Details on GND, Digital In (Coaxial/Optical), Phono, and Line In/Out jacks.
Information on connecting speakers and the RI system.
Guidance on using various audio and control cables.
Instructions for connecting a CD player using analog audio cables.
Instructions for connecting a CD player using digital audio cables.
Details on linking Onkyo equipment for synchronized operation.
Guide to connecting a turntable, including ground wire and MM cartridge use.
Illustrates connecting a CD player via LINE for RI system operation.
Explains linking multiple RI-compatible devices.
Instructions for connecting RI docks and tuners via various methods.
Guide on connecting speakers, impedance requirements, and proper wiring.
Steps for connecting the unit to an AC power outlet.
Covers turning the unit on/off, selecting input sources, and adjusting volume.
Details on DIRECT function, BASS, and TREBLE controls.
Using Loudness, Balance, and connecting headphones.
How to set and manage the automatic standby mode.
Explains the primary buttons for controlling the unit.
Details buttons used to control connected Onkyo RI-enabled equipment.
Basic procedures like power cycling and returning to default settings.
Solutions for problems like no power, no sound, or unexpected turn-offs.
Addressing noise, poor sound quality, and RI function malfunctions.
