Onkyo DV CP704

40
Advanced Playback—Continued
With the Last Memory function you can resume play-
back from where you left off even if another disc has
been selected or the disc has been removed. Last Mem-
ory also remembers the soundtrack and subtitle lan-
guages that you were using.
Notes:
• The Last Memory function can store the settings for
up to six DVD-Video discs. When you set the Last
Memory function for a seventh disc, the first disc’s set-
tings are lost.
• The Last Memory function will not work while a
menu is being displayed onscreen.
• The Last Memory function may not work with some
DVD-Video discs.
•Even if you select another disc, or inadvertently turn
off the DV-CP704 during playback, you can resume
playback from the same point when you select the disc
again.
Using Last Memory
1
During playback, press the
[LAST MEMORY] button.
The last memory point for the disc is
stored, the LAST indicator appears,
and “LAST MEM” appears on the dis-
play.
If the [LAST MEMORY] button is
pressed again, the last memory point
will be updated.
2
To stop playback, press the Stop
[] button once or twice.
At this point you may choose to
play another disc, or to turn off
the DV-CP704.
3
To resume playback, select the
disc and press the Play [ ] but-
ton.
The Last Memory dialog box appears,
as shown.
PLAY
STOP
LAST MEMORY
ENTER
DVD
Remote controller
Remote controller
Remote controller
Last Memory is set.
Start playback from memory location ?
Ye s No Memory Clear
4
To resume playback from last
memory point, select “Yes,” and
then press [ENTER].
To start playback from the beginning,
select “No,” and then press [ENTER].
To start playback from the beginning
and delete the last memory point, select
“Memory Clear,” and then press
[ENTER].
Remote controller