145
Controlling Other Components—Continued
t PLAY MODE button*
Selects play modes on components with selectable
play modes.
u CLR button
Cancels functions and clears entered numbers.
Notes:
• With some components, certain buttons may not work
as expected, and some may not work at all.
• If you enter the remote control code for a HD DVD or
Blu-ray player that has A, B, C, and D or colored but-
tons, the [SEARCH], [REPEAT], [RANDOM], and
[PLAY MODE] buttons will work as colored or A, B,
C, D buttons. In this case, these buttons cannot be used
to set repeat playback, random playback, or select play
modes.
• Buttons marked with an asterisk (*) are not supported
by the function.
By pressing the REMOTE MODE button that’s been
programmed with the remote control code for your VCR
(TV/VCR, PVR, DBS/PVR combination or cable/PVR
combination), you can control your video recorder with
the following buttons.
For details on entering a remote control code for a differ-
ent component, see page 141.
a ON, STANDBY buttons
Set the video recorder to On or Standby.
b TV [9] button
Set the TV to On or Standby.
c TV [INPUT] button
Selects the TV’s external inputs.
d TV VOL [q]/[w] button
Adjust the TV’s volume.
e GUIDE button
Displays the program guide or navigation list.
f Arrow [q]/[w]/[e]/[r] and ENTER buttons
Used to navigate menus and select items.
g SETUP button
Displays the video recorders setup menu.
h Previous [7] button
Previous or instant replay function.
i Number buttons
Enter numbers. The [0] button enters 11 on some
components. The [+10] button works as a +10 but-
ton or “--/---” button.
j DISPLAY button
Displays information.
k MUTING button (69)
Mutes or unmutes the AV receiver.
l CH +/– button
Selects TV channels on the video recorder.
m VOL [q]/[w] button (67)
Adjusts the volume of the AV receiver.
n PREV CH button
Selects the previous channel.
o RETURN button
Exits the menu or returns to the previous menu.
p Next [6] button
Next or advance function.
q [1], [3], [2], [5], [4] buttons
Play, Pause, Stop, Fast reverse, and Fast forward.
r CLR button
Cancels functions or enters the number 12.
Note:
With some components, certain buttons may not work as
expected, and some may not work at all.
Controlling a VCR or PVR
r
o
p
q
k
j
n
m
i
h
g
b
*1
e
c
f
a
d
l
Press the appropriate
REMOTE MODE button first.
*1
When you want to change the remote controller mode without
changing the current input source, press the [MODE] button and
within about eight seconds, press the REMOTE MODE button.
Then, with the AV receiver’s remote controller, you can control
the component corresponding to the button you pressed.
To Next Page
Loading...
Need help?
General
