Using the Timers—Continued
60
Turning Timers On and Off
Once a timer has been programmed, you can turn it on
or off as necessary. For example, while you’re on
holiday, you may want to turn off the timer you use as
an earlymorning alarm.
Checking Timer Settings
1
Press the [TIMER] button repeatedly
to select Timer 1, 2, 3, or 4.
When a timer has been programmed, its
number appears on the display.
2
Use the Previous and Next [ ]/
[ ] buttons to select “Timer On” or
“Timer Off”.
After a few moments, the previous display
reappears.
1
Press the [TIMER] button repeatedly
to select Timer 1, 2, 3, or 4, and then
press [ ].
2
Press [ ] repeatedly to see all of
the timer’s settings.
• You can change the settings by using the
Previous and Next [ ]/[ ] buttons.
• If you change the settings of a timer that
is off, that timer will be turned on.
If you don’t change any settings, the
previous display reappears.
To return to the previous display at any
point in this procedure, press the [MENU/
NO] button.
To Next Page
Loading...
Need help?
General
