Remote
Controller-Continued
@ Previous and Next [
....
]1[..-] buttons
These buttons are used to select the previous or next
track on an HDD component. Pressing them
repeatedly selects earlier or later tracks. On a
cassette deck, they're used for rewind and fast
forward.
@ Reverse and Fast Forward [
...
]I[~
] buttons
These buttons are used for reverse and fast forward
on an HDD component.
@ DECK AlHDD (DOCK) buttons
Pause [II]/Reverse Play
[~]:
Suspends playback
on an HDD component; starts reverse playback on a
cassette deck.
Play
[~]:
Starts playback on an HDD
or
cassette
component.
Stop
[.]:
Stops playback on an HDD or cassette
component.
@ DECK B buttons
On twin cassette decks, only deck B can
be
controlled.
Play
[~]:
Starts playback.
Stop
[.]:
Stops playback.
Reverse Play
[~]:
Starts reverse playback.
@ MUTING button (21)
Mutes or unmutes the receiver.
@ VOLUME
[.]I[T]
buttons (20)
Adjusts the volume
of
the receiver regardless
of
the
currently selected remote controller mode.
Point the remote controller toward the remote control
sensor.
Remote control sensor
Notes:
• The remote controller may not work reliably
if
the
receiver is subjected to bright light, such
as
direct
sunlight or inverter-type fluorescent lights. Keep this
in mind when installing.
•
If
another remote controller
of
the same type is used
in the same room, or the receiver is installed close to
equipment that uses infrared rays, the remote
controller may not work reliably.
•
Don't
put anything, such as a book, on the remote
controller, because the buttons may be pressed
inadvertently, thereby draining the batteries.
• The remote controller may not work reliably
if
the
receiver is installed in a rack behind colored glass
doors. Keep this in mind when installing.
The remote controller will not work
if
there's
an
obstacle
between it and the receiver's remote control sensor.
11
To Next Page
Loading...
