Supplied Accessories
Make sure you have the following accessories:
Remote controller and two batteries (AAlR6)
Indoor
FM
antenna
AM
loop antenna
* In catalogs and on packaging, the letter at the end
of
the
product name indicates the color. Specifications and
operation are the same regardless
of
color.
Detach the battery cover by pressing the
tab and pulling up the cover.
Insert
two
AA-size batteries
into
the
battery compartment.
Carefully follow the polarity diagram (positive +
and negative - symbols) inside the battery
compartment.
After batteries are installed and seated
correctly, attach the compartment cover.
Notes:
•
If
the remote controller doesn't work reliably, try
replacing the batteries.
•
Don't
mix new and old batteries
or
different types
of
batteries.
•
If
you intend not to use the remote controllerfor a long
time, remove the batteries to prevent damage from
leakage
or
corrosion.
• Expired batteries should be removed as soon as
possible to prevent damage from leakage or
corrosion.
Features
o Newly Designed, Brushed Hairline Aluminum
Front
Panel
o 50 Watts/Channel @ 8 ohms (FTC)
(North American model)
o 90Watts/Channel @ 4
ohms
(IEC)
(European
and
Australian
model)
o WRAT (Wide Range Amplifier Technology)
o High-Current, Low-Impedance Drive
o Discrete
Output
Stage Circuitry
o 5 Audio Inputs (CD, TAPE 1, TAPE 2, LINE 1/
DVD,
LINE
2)
and
2 Outputs
o Phono
Input
o SpeakerAlB Terminals
o RDS (PSIPTYIRTITP) (European model)
o
IR
Input/Output
o Banana Plug-Compatible Speaker Posts
(North American model)
o Compatible with RI Dock for the iPod
5
To Next Page
Loading...
