You can check the network connection.
Press ENTER when "Start" is displayed.
Wait for a while if "Network" cannot be selected. It will appear when the
network function is started up.
Bluetooth
Bluetooth
Default Value: On
Select whether or not to use the Bluetooth function.
"On": Enables connection with a Bluetooth-enabled device by using the
Bluetooth function. Select "On" also when making various Bluetooth
settings.
"Off": When not using the Bluetooth function
Direct Change
Default Value: On
The input of the unit will automatically be switched to "BLUETOOTH"
when connection is made from a Bluetooth-enabled device to the unit.
"On": The input will automatically become "BLUETOOTH" when a
Bluetooth-enabled device is connected.
"Off": The function is disabled.
If the input is not switched automatically, set to "Off" and change the
input manually.
Auto Reconnect
Default Value: On
This function automatically reconnects to the Bluetooth-enabled device
connected last when you change the input selector to "BLUETOOTH".
"On": Use this function
"Off": Do not use this function
This function may not work depending on your Bluetooth-enabled
device.
Wakeup via Bluetooth
Default Value: Off
This function wakes up the unit on standby by connecting a Bluetooth-
To Next Page
Loading...
