6.Miscellaneous
Volume Setup
Make the detailed volume setting of the unit.
Volume Display
Default Value: Absolute
Switch the volume display between the absolute value and relative
value. The absolute value 82 is equivalent to the relative value 0 dB.
"Absolute": Absolute value such as "1" to "99"
"Relative (THX)": Relative value such as "-81dB" and "+18dB"
If the absolute value is set to 82, "82Ref" will appear on the display
and the "THX" indicator will flash.
Muting Level
Default Value: -∞dB
Set the volume lowered from the listening volume when muting is on.
Select a value from "-∞dB", "-50dB" to "-10dB". (in 10 dB increments)
Maximum Volume
Default Value: Off
Set the maximum value to avoid too high volume. Select a value from
"Off", "50" to "99".
Power On Volume
Default Value: Last
Set the volume level of when the power is turned on. Select a value
from "Last" (Volume level before entering standby mode), "Min", "1" to
"99" and "Max".
You cannot set a higher value than that of "Maximum Volume".
Headphone Level
To Next Page
Loading...
