Default Value: 0 dB
Adjust the volume level difference between speakers and headphones.
Select a value between "-12 dB" to "+12 dB".
OSD Setup
Make the setting of on-screen display function that can display the setting
menu screen, volume operation screen and the like on the TV.
On Screen Display
Default Value: On
Set whether or not to display the operation screen on the TV.
"On": The operation screen will be displayed on the TV.
"Off": The operation screen will not be displayed on the TV.
The operation screen may not be displayed depending on the input
signal even if "On" is selected. If the operation screen is not
displayed, change the resolution of the connected device.
Language
Default Value: English
Select the on-screen display language.
Screen Saver
Default Value: 3min
Set the time to start the screen saver. Select a value from "3min",
"5min", "10min" and "Off".
To Next Page
Loading...
