EasyManua.ls Logo

Onkyo TX-RZ70 - Page 140

Onkyo TX-RZ70
214 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
140
SetupSetup
2. Speaker
Loudness Plus (Default Value: On)
This cannot be selected when either of the slots is selected with "Dirac Live"
( p93).
When this is set to "On", you can enjoy even subtle nuances of audio
expression at low volume. This is only available when the THX listening mode
is selected.
THX Loudness Plus
THX Loudness Plus is a new volume control technology mounted on THX Ultra
and THX Select-certied receivers. With THX Loudness Plus, home theater
audience can experience the rich details of surround sound at any volume
level.
If the volume is turned down below the reference level, elements of sound in a
certain range are lost or the sound is perceived di󰀨erently by the listener.
THX Loudness Plus compensates for the tonal and spatial shifts that occur
when the volume level is reduced, by intelligently adjusting the levels of the
surround channels and their frequency response in the environment.
This enables users to experience the true impact of soundtracks regardless of
the volume setting. THX Loudness Plus is automatically applied when listening
in any THX listening mode. In the newly developed THX Cinema, THX Music
and THX Games modes, the optimum THX Loudness Plus setting is applied
according to the type of content.
8. EQ for Standing Wave
This controls the a󰀨ect of the standing waves that occur when sound waves
reverberating o󰀨 obstacles such as walls interfere with the original sound waves.
Filter 1 (Default Value: 0.0dB)
Filter 2 (Default Value: 0.0dB)
Filter 3 (Default Value: 0.0dB)
1. After selecting the Filter to adjust from "Filter 1" to "Filter 3" with / , press
ENTER.
2. Select the frequency with / , then adjust the attenuation with / . The
frequency can be selected between "63 Hz" and "250 Hz".
Attenuation can be selected between "0.0 dB" and "12.0 dB" (0.5 dB
intervals).
9. Speaker Virtualizer
The Speaker Virtualizer function can be switched between On and O󰀨.
Speaker Virtualizer (Default Value: On)
On Listening modes such as T-D that have virtual speaker e󰀨ects
can be selected.
O󰀨 Listening modes such as T-D that have virtual speaker e󰀨ects
cannot be selected.

Table of Contents

Other manuals for Onkyo TX-RZ70

Related product manuals