Contents
2
Reducing the Power Consumption in Standby
State
When the following functions are enabled, the power consumption in
standby state increases. To reduce the power consumption in standby state,
check each setting and set the functions to "O".
– HDMI CEC ( →p68)
– HDMI Standby Through ( →p68)
– USB Power Out at Standby ( →p71)
Table of contents
Detailed contents (Next page)
Firmware Update
Speaker InstallationSpeaker Installation
Speaker ConnectionsSpeaker Connections
Troubleshooting
Supplementary Information
Features, etc. released in rmware updates
To Next Page
Loading...
