49
Playback
Playing Back
1. Press ZONE A/B to select an audio output destination.
• ZONE A: Outputs audio only to the main room (ZONE A). "A" on the display of
the main unit lights up.
• ZONE B: Outputs audio only to the other place (ZONE B). "B" on the display
of the main unit lights up.
• ZONE A+B: Outputs audio to both the main room (ZONE A) and the other
place (ZONE B). "A" and "B" on the display of the main unit light up.
ZONE A/B
VOLUME
2. Start play on the AV component.
3. Adjust the volume on the integrated amplier.
• If the wireless headphones or wireless speakers have volume controls,
control the volume on those devices.
• If "ZONE A+B" is selected as an audio output destination, you can select only
the "Stereo" listening mode for the main room (ZONE A) when using the 2.1ch
speaker layout. When using a speaker layout of 3.1ch or more, you can select
only the "AllCh Stereo" listening mode.
To Next Page
Loading...
