Onkyo TX-SR3100

36
Playback
Adjusting the volume
1. Press the VOLUME buttons on the remote controller to adjust the volume.
To temporarily turn o󰀨 the sound, press the MUTE button. Press again to
cancel.
• When Dolby Vision images are received, the volume bar on the TV screen
changes from blue to magenta.
You can also adjust the volume with the following operations:
– Using the MASTER VOLUME on the main unit
– Using the linking function (HDMI CEC) ( →p36)
Using the linking function (HDMI CEC)
By using a HDMI cable and connecting to a TV that is compatible with the
HDMI CEC (Consumer Electronics Control) function, you are able to perform
operations such as adjusting the volume of this unit with the TV's remote
controller and link power On/O󰀨. Furthermore, if you have connected a Blu-ray
Disc player, GAME, etc. that is compatible with the HDMI CEC function, input
switching is performed automatically.
• HDMI CEC settings ( →p68) (the default value is On)
• For information about the HDMI CEC functions of the TV, refer to the
operating instructions, etc., for the TV.
• The unit is designed to link with products that comply with the CEC standard,
and that linked operation is not always guaranteed with all CEC devices.
• For linked functions to work properly, do not connect CEC-compliant devices
exceeding the connectable number to the HDMI jack as shown below.
– Blu-ray Disc/DVD players: up to 3 units
– Blu-ray Disc/DVD recorders: up to 3 units
– Cable TV tuner, terrestrial digital tuner, and satellite broadcasting tuner: up
to 4 units