Onkyo TX-SR3100

63
Setup
3. Audio Adjust3. Audio Adjust
 1. Multiplex/Mono
Change the settings of multiplex audio playback.
 Multiplex Input Channel (Default Value: Main)
Set the audio channel or language to be output when playing multiplex audio or
multilingual broadcasts, etc.
• For multiplex audio broadcasts, pressing the
INFORMATION button on the
remote controller will display "1+1" on the main unit’s display.
Main Main channel only
Sub Sub channel only
Main / Sub Main and sub channels will be output at the same time.
 Mono Input Channel (Default Value: Left + Right)
Set the input channel when playing back analog or 2 ch PCM signals in the
Mono listening mode.
Left Left channel only
Right Right channel only
Left + Right Left and right channels
 2. Dolby
Change the setting of when Dolby signals are input.
 Loudness Management (Default Value: On)
When playing Dolby TrueHD, enable the dialog normalization function which
keeps the volume of dialog at a certain level. Note that when this setting is O󰀨,
the Late Night function that allows you to enjoy surround at low volumes is xed
to o󰀨 when playing Dolby Digital Plus/Dolby TrueHD.
On When this function is used
O󰀨 When this function is not used
 Dialogue Enhancement (Default Value: O󰀨)
Improves the intelligibility of dialogue by continually monitoring audio and
applying dynamic processing.
On When this function is used
O󰀨 When this function is not used