Onkyo TX-SR3100

75
Setup
• To perform the Initial Setup again after the setting is completed, press
SETUP, select "Miscellaneous" - "Initial Setup", and press ENTER.
1. Speaker Setup
1. Select the connected speaker conguration and press ENTER.
Note that the image on the screen changes each time you select the number
of channels in "Speaker Channels".
Speaker Setup
Select how many speakers you have.
Next
ENTER
Speaker Channels
Speaker Impedance
5.1 ch
Yes
6 ohms or above
Subwoofer
- - -Height Speaker
2. The speaker combination selected in step 1 is displayed. "Yes" is displayed
for the selected speakers. If the setting is correct, press ENTER.
3. Select "Next" and press ENTER. Then a test tone is output from each
speaker to conrm the connection. Selecting each speaker with the cursors
/ UP/DOWN will output the test tone. Press ENTER after conrmation.
4. If there is no problem with the speaker connection, select "Next" and press
ENTER. To return to "Speaker Setup", select "Back to Speaker Setup" and
press ENTER.
2. ARC Setup
If you have connected a TV that supports ARC, select "Yes" and press ENTER.