Onkyo TX-SR3100

59
Setup
2. Speaker2. Speaker
 1. Conguration
Change the settings of connection environment of the speakers.
 Speaker Channels (Default Value: 5.1 ch)
Select "2.1 ch", "3.1 ch", "4.1 ch", "5.1 ch", "2.1.2 ch" or "3.1.2 ch" to suit the
number of speaker channels connected.
 Subwoofer (Default Value: Yes)
Set whether a powered subwoofer is connected or not.
No When a powered subwoofer is not connected
Yes When a subwoofer is connected
 Height Speaker (Default Value: Top Middle)
Set the speaker type if height speakers are connected to the HEIGHT /
SURROUND terminals.
Select "Top Middle", "Dolby Speaker (Front)" or "Front High" according to the
type and layout of the connected speakers.
• If an item cannot be selected even though connection is correct, check
that the settings in "Speaker Channels" matches the number of connected
channels.
 Speaker Impedance (Default Value: 6 ohms or above)
Set the impedance (Ω) of the connected speakers.
• For impedance, check the indications on the back of the speakers or their
instruction manual.
4ohms When any of the connected speakers have 4 Ω or more to less
than 6 Ω impedance
6 ohms or above When all the connected speakers have an impedance of 6 Ω
or more