Onkyo TX-SR3100

46
Playback
You can quickly set convenient features such as adjusting sound quality.
Quick Menu
HDMI
Audio
Room EQ
Level
A/V Sync
Audio Return Channel
BD/DVD
You can make the settings on the TV screen during playback. Press Q QUICK
MENU on the remote controller to display the Quick Menu.
Select the item with the cursors / UP/DOWN of the remote controller, and
press the ENTER button to conrm your selection.
Use the cursors to change the settings.
• To return to the previous screen, press RETURN/EXIT.
• To exit the settings, press Q QUICK MENU.
Note
• When the input signals are ones that need a high bandwidth, such as 8K
signals, the Quick Menu may not be displayed.
 HDMI
A/V Sync: If the video is behind the audio, you can delay the audio to o󰀨set the
gap. The setting can be set for each input.
• It cannot be set if the listening mode is Direct.
Audio Return Channel: You can enjoy the sound of the HDMI-connected ARC-
compatible TV through the speakers connected to the unit. Select "On" when
listening to the audio of TV using the speakers of this unit. Select "O󰀨" when the
ARC function is not used.
 Audio
Music Optimizer: Improve the quality of the compressed audio. Playback sound
of lossy compressed les such as MP3 will be improved. The setting can be set
for each input. This works in signals whose sampling frequencies are 48 kHz or
less. The setting is not e󰀨ective in the bitstream signals.
• It cannot be set if the listening mode is Direct.
Late Night: Enable small sounds to be easily heard in detail. It is useful when
you need to reduce the volume while watching a movie late night.
• This function cannot be used in the following cases.
– When playing Dolby Digital Plus or Dolby TrueHD with "Loudness
Management" set to "O󰀨"
– When the input signal is DTS:X, and "Dialog Control" is not 0 dB
– When the input signal is Analog/DSD and the listening mode is Direct
Quick Menu