Onkyo TX-SR3100

47
Playback
Stereo Assign: This function enables you to select a pair of speakers to output
stereo sound. Apart from the front speakers (Front), you can select the Surround
speakers (Surround), Height speakers (Height).
"Front" "Surround"
Selectable
• The listening mode switches to "Stereo" if the audio output destination is
changed.
Digital Filter: You can switch the type of digital lter in the AUDIO DAC (digital
analog converter). You can choose "Slow" (gives the sound a soft and uid feel),
"Sharp" (gives the sound more structure and rmer feel), "Short" (gives the
sound a feeling of a quick start and moving forward), or "Auto" (automatic). The
setting can be separately set to each input selector. This can be set when the
sampling frequency is 44.1 kHz or more.
 Room EQ
AccuEQ: Enable or disable the equalizer function that corrects for sound
distortion caused by the acoustic environment of the room.
On (All Ch): EQ that corrects according to the room acoustics acquired with the
AccuEQ calibration is applied to all channels.
On (ex. L/R): The same EQ as "On (All Ch)" is applied to speakers other than the
Front Speakers. EQ correction for the Front Speakers is turned o󰀨.
• The setting can be separately set to each input selector.
• It cannot be set if the listening mode is Direct.
Cinema Filter: Adjusts the soundtrack with the enhanced high range so that it
suits a home theater.
The following listening modes can be used: Dolby Audio - DD, Dolby Audio -
DD+, Dolby Audio - Surr, Dolby Audio - TrueHD, Multichannel, DTS, DTS-HD,
DTS Neural:X and DSD
 Level
Front: Adjust the speaker level of the front speakers while listening to the sound.
Center: Adjust the speaker level of the center speaker while listening to the
sound.
Subwoofer: Adjust the speaker level of the subwoofer while listening to the
sound.
• If you set the unit to the standby mode, the adjustments you made will be
restored to the previous statuses.