13
Remote Controller
A ON/STANDBY button
B ZONE A/B button: Selects an audio output
destination from among "ZONE A", "ZONE B"
and "ZONE A+B". ( →p48)
C SLEEP button: You can allow the unit to enter
standby automatically when the specied time
has elapsed. Select the time from "30 min",
"60 min", "90 min" and "O". When you do not
want to turn the unit to standby automatically,
select "O". You can also set this by pressing
SETUP button and selecting "Hardware" -
"Power Management" - "Sleep Timer" ( →p71)
on the Setup menu.
D Input selector buttons: Switches the input to be
played.
E Play buttons: Used for playback operation of a
BLUETOOTH-enabled device. Also, switching
to "CEC MODE" with T MODE button allows
you to operate an HDMI CEC function-enabled
AV component. (Some devices may not be
operated.)
F Q QUICK MENU button: Pressing this button
during playback allows you to make settings
such as "HDMI" and "Audio" quickly on the TV
screen while playing. ( →p46)
G INFORMATION button: Switches the
information on the display and is used to operate
RDS (European, Middle East, Australian and
Asian models) ( →p42).
H Cursor / / / UP/DOWN/LEFT/RIGHT
buttons and ENTER button: Select an item with
the cursors, and press ENTER to conrm your
selection.
I SETUP button: Displays advanced setting
items on the TV or the display to have a more
enjoyable experience with this unit. ( →p53)
J RETURN/EXIT button: Returns the display to
the previous state while setting.
To Next Page
Loading...
