Onkyo TX-SR3100

73
Setup
6. Miscellaneous
 2. Firmware Update
Change the settings for Firmware Update.
 Version (Default Value: -)
The current rmware version is displayed.
 Update via USB (Default Value: -)
Press ENTER to select when updating the rmware via USB.
• Wait for a while if "Firmware Update" cannot be selected.
 3. Initial Setup
Make the initial setup from the setup menu.
• Wait for a while if "Initial Setup" cannot be selected.
 4. Lock
Lock the Setup menu so that the settings cannot be changed.
 Setup Parameter (Default Value: Unlocked)
Lock the Setup menu so that the settings cannot be changed.
Locked The menu is locked.
Unlocked The menu is unlocked.
 5. Factory Reset
All the settings are restored to factory defaults.
 Factory Reset (Default Value: -)
All the settings are restored to factory defaults.
Select "Start" and press ENTER.
• If "Factory Reset" is performed, your settings are restored to the default
values. Be sure to note down your setting contents beforehand.