9
Front Panel
I BLUETOOTH indicator: Lights up when this
unit and a BLUETOOTH-enabled device are
connected.
J DOLBY ATMOS indicator: Lights up when
Dolby Atmos signals are reproduced in
appropriate listening mode.
K Remote control sensor: Receives signals from
the remote controller.
• The reception range of the remote controller
is within a distance of approx. 16´/5 m, and
an angle of 20° in vertical direction and 30° to
right and left.
L ZONE A/B button: Selects an audio output
destination from among "ZONE A", "ZONE B"
and "ZONE A+B". ( →p49)
M INFO button: Switches the information on the
display and is used to operate RDS (European,
Middle East, Australian and Asian models)
( →p42)
N DIMMER button: Switches the brightness of the
display with three levels. It cannot be turned o
completely.
O Display ( →p10)
P SETUP button: You can display advanced
setting items on the TV and the display to have
a more enjoyable experience with this unit.
( →p53)
Q Cursor / / / UP/DOWN/LEFT/RIGHT
buttons and ENTER button: Select an item with
the cursors, and press ENTER to conrm your
selection. When using TUNER, use them to tune
in to stations. ( →p40)
R RETURN button: Returns the display to the
previous state while setting.
To Next Page
Loading...
