GSM/3G User Manual
28 | 82
Enable Call
Duration Limitation
This function is to limit the total call duration of GSM channel.
The max call duration is between 1 to 65535 minutes.
The value of limitation single call, this value range is 1-65535.
Step length multiplied by time of single call just said a single call
duration time allowed.
A single call over this time, GSM side of the operators began to
collect fees, unit for seconds.
Define a threshold value of call minutes, while the call minutes
less than this value, the gateway will send alarm information to
designated phone.
Alarm port information description, which will be sent to user
mobile phone with alarm information.
Receiving alarm phone number, user will received alarm
message from gateway.
This value is multiplied by to step length is a rest call time.
Automatic restore remaining talk time, that is, get total call
minutes of GSM channel.
Reset call minutes by date, by week, by month.
Defined next reset date, system will count start from that date
and work as Reset Period setting
You can save your configuration to other ports.
Figure 3-14 Save To Other Ports
If you have set like this, you will see many on the Web GUI, you can set whether to
check.
Notice: When you do some changes, you need to Save and Apply, then “Remain Time”
will show as you set.
Your calling status will show on the main interface.
To Next Page
Loading...
