18
4.10.4 Overview about Service Menu items
C0, C8 & C9 – Configuration
This Service menu Items are factory settings. Do not
change!
C1 – Variant
Current variant for the control panel.
C2 – Software version
Current software release for the control panel.
C3 – Operating hours
Total number of operating hours. Hours in standby
operation are not counted.
C4 – Max NTC temperature
C5 – Numbers of wrong connections
Total number of wrong connections to overvoltage
C6 – Demo mode
Value Operation
0 Normal operation
1
Enabling all function of control panel without
any power dissipation
C7 – Display test
Activation of all LEDs and 7-segment displays for
functional test.
Installation
EN
To Next Page
Loading...
