Opera PRIMA - User Menu Customization

34
 Operation
EN
Item
Meaning
Changeable
Value
Format
Remark
U0
Reserved for the
manufacturer
-
-
Reserved for the manufacturer
U1
Reserved for the
manufacturer
-
-
Reserved for the manufacturer
U2
Volume for button
tones
Yes
0…3
Adjustment of the volume for button
tones
0: no button tones
1: min. volume
2: mid. volume
3: max. volume
Notes:
For normative reasons, button tones for switching ON
and OFF cannot be disabled. They will be emitted
with last volume level which has been set before
disabling the button tones.
Tones for errors are always emitted with max. volume
(setting 3) and cannot be disabled.
U3
Volume for signal
tones
Yes
0…3
Adjustment of the volume for signal tones (e. g. when
timer runs out)
0: min. volume
...
3: max. volume
U4
Display
brightness
Yes
0…9
Adjustment of the brightness for the display
0: Max. brightness
....
9: Min. brightness
U5
Timer animation
Yes
0…1
0: No Timer animation
1: Timer is animated 10 min before expiration
U6
Permanent pot
detection
Yes
0…1
0: permanent pot detection not active
1: Permanent pot detection active
U7
Behaviour when
timer has run out
Yes
0…2
0: Signal tone for 120 sec
1: Signal tone for 10 sec
2: No tone
The sections of the User menu that are not mentioned on the above table are factory settings. Do not
modify them.