100
13.4. Pairing With Devices in Range
Pairing with another Bluetooth device allows you to exchange information in a secure manner. Make
sure that the two devices are within a range of 10 meters and that
Bluetooth is turned on and in
visible mode.
1. Tap >Settings > Bluetooth > Devices.
2. Tap Add new device.
A list of Bluetooth enabled devices within range displays on screen.
3. Select the device to connect to and tap Next. See below left.
4. For a more secure connection, enter a passcode as shown
The same passcode must be entered on the other device. If you do not want to use a passcode,
tap Next.
If the connection is successful, a Device Added
confirmation message displays on screen.
See below right.
5. Tap Done.
Figure 104. Bluetooth Devices Figure 105. Enter Passcode Figure
Pairing with another Bluetooth device allows you to exchange information in a secure manner. Make
Bluetooth is turned on and in
The same passcode must be entered on the other device. If you do not want to use a passcode,
confirmation message displays on screen.
To Next Page
Loading...