72
5. In the User name field, enter your user name for the GPRS network, if required. See below left.
• In the Password field, enter your password, if required.
• In the Domain field, enter your domain name, if provided by your ISP.
6. Tap Advanced > Servers.
7. Select the check box next to Use specific server address and enter the following information:
• In the DNS field, enter the primary DNS address, if required.
• In the Alt DNS field, enter the secondary DNS address, if required.
8. Tap the TCP/IP tab.
9. Select the check box next to Use specific IP address and enter the IP address for the device,
if required.
10. Tap OK to update the settings.
11. Tap Finish to complete the connection setup.
Figure 79. My Connections
NOTE: The device uses this connection when you open a program that connects to the Internet.
To Next Page
Loading...