Optimum OPTIDRILL B 23PRO - Authorized Staff

OPTIMUM
MASCHINEN - GERMANY
Safety
Version 2.0.2 2014-11-04Page 12 Original operating instructions
B17Pro | B23Pro | B26Pro | B33ProGB
tion in the standard mode must only be performed by the operator if it is indicated in these
instructions and if the operating company expressively commissioned the operator.
Electrical specialist
Due to his professional training, knowledge and experience as well as his knowledge of respec-
tive standards and regulations the electrical specialist is able to perform works on the electrical
system and to recognise and avoid any possible dangers himself.
The electrical specialist is specially trained for the working environment in which he is working
and knows the relevant standards and regulations.
Specialist staff
Due to its professional training, knowledge and experience as well as his knowledge of rele-
vant regulations the specialist staff is able to perform the assigned tasks and to recognise and
avoid any possible dangers himself.
Instructed persons
Instructed persons were instructed by the operating company about the assigned tasks and any
possible risks in case of improper behaviour.
1.5.2 Authorized staff
WARNING!
Inappropriate operation and maintenance of the drilling machine constitutes a danger for
the personnel, objects and the environment.
Only authorized staff may operate the drilling machine !
Persons authorized to operate and maintain should be trained technical staff and instructed by
the ones who are working for the operating company and for the manufacturer.
The operating company must
Obligations of
the operating
company
 train the staff,
 instruct the staff in regular intervals (at least once a year) on
- all safety standards that apply to the machine,
- the operation,
- accredited technical guidelines,
 check staff‘s state of knowledge,
 document the trainings/instructions,
 require staff to confirm participation in training/instructions by means of a signature,
 check whether the staff is working safety- and risk-conscious and observe the operating
instructions.
The operator must
Obligations of
the operator
 have obtained a training regarding the handling of the drilling machine,
 know the function and mode of action,
 before taking the machine in operation
- have read and understood the operating instructions,
- be familiar with all safety devices and instructions.
Additional
requirements
regarding the
qualification
For work on the following parts there are additional requirements:
 Electric components or operating materials: Must only be performed by a qualified electri-
cian or person working under the instructions and supervision of a qualified electrician.