Optimum OPTIDRILL B 23PRO - Machine Maintenance and Repair; Maintenance Safety and Procedures

OPTIMUM
MASCHINEN - GERMANY
Maintenance
Version 2.0.2 2014-11-04 Page 43Original operating instructions
B17Pro | B23Pro | B26Pro | B33Pro GB
6 Maintenance
In this chapter you will find important information about
 Inspection
 Maintenance
 Repair
of the drilling machine.
ATTENTION !
Properly performed regular maintenance is an essential prerequisite for
 operational safety,
 failure-free operation,
 long durability of the drilling machine and
 the quality of the products which you manufacture.
Installations and equipment from other manufacturers must also be in good order and condition.
6.1 Safety
WARNING!
The consequences of incorrect maintenance and repair work may include:
 Very serious injury to personnel working on the drilling machine,
 Damage to the drilling machine.
Only qualified staff should carry out maintenance and repair work on the drilling
machine.
6.1.1 Preparation
WARNING!
Only carry out work on the drilling machine if it has been disconnected from the mains
power supply.
 "Disconnecting and securing the drilling machine“ on page 17
Attach a warning sign.
6.1.2 Restarting
Before restarting run a safety check.
 "Safety check“ on page 15
WARNING!
Before activating the drilling machine, double check that this will not
 no dangers generated for persons,
 the drilling machine is not damaged.