D17Pro_D23Pro_D26Pro_D33Pro_CE_en.fm
EC Declaration of Conformity
according to Machinery directive 2006/42/EC, Annex II 1.A
The manufacturer / distributor Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
D - 96103 Hallstadt, Germany
hereby declares that the following product
Product designation: Drilling machine
Type designation: D17 Pro
| D23 Pro | D26 Pro | D33 Pro
Trade designation: OPTIdrill D17 Pro ; OPTIdrill D23 Pro
OPTIdrill D26 Pro ; OPTIdrill D33 Pro
fulfils all the relevant provisions of the directive specified above and the additionally applied directives (in
the following) - including the changes which applied at the time of the declaration.
Description:
Hand-controlled drilling machine.
The following additional EU directives have been applied:
EMC Directive 2014/30/EU ; Restriction of the use of certain hazardous substances in electrical and elec-
tronic equipment 2015/863/EU
The following harmonized standards were applied:
EN 12717 Machine tools - Safety - Drilling machines
EN 60204-1 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN 13849-1 Safety of machinery - Safety related parts of controls - Part 1: General design principles
EN 13849-2 Safety of machinery - Safety related parts of controls - Part 2: Validation
EN ISO 12100 Safety of machinery - General principles for design - Risk assessment and risk reduction
Name and address of the person authorized to compile the technical file:
Kilian Stürmer, phone: +49 (0) 951 96555 - 800
Kilian Stürmer (CEO, General Manager)
Hallstadt, 2022-04-05
To Next Page
Loading...
