Appendix
Version 1.0.3 - 2022-04-06 112 Translation of original instruction
D17 Pro│D23 Pro│D26 Pro│D33 Pro
EN
D17Pro_D23Pro_D26Pro_D33Pro_GB_9.fm
8.6 Disposal via municipal collection facilities
Disposal of used electrical and electronic components
(Applicable in the countries of the European Union and other European countries with a sepa-
rate collecting system for those devices).
The sign on the product or on its packing indicates that the product must not be handled as
common household waste, but that is needs to be disposed of at a central collection point for
recycling. Your contribution to the correct disposal of this product will protect the environment
and the public health. Incorrect disposal constitutes a risk to the environment and public health.
Recycling of material will help reduce the consumption of raw materials. For further information
about the recycling of this product, please consult your District Office, municipal waste collec
-
tion station or the shop where you have purchased the product.
8.6.1 Change information operating manual
8.7 Product follow-up
We are required to perform a follow-up service for our products which extends beyond ship-
ment.
We would be grateful if you could send us the following information:
Modified settings
Any experiences with the drilling machine which might be important for other users
Recurring malfunctions
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Fax +49 (0) 951 - 96 555 - 888
email: info@optimum-maschinen.de
Chapter Short summary new version number
parts Gear depth measurement before the quill to gear depth
measurement after the quill.
1.0.1
parts Length of V-belt from 735 to 750 for D33Pro 1.0.2
3 interdepartmental transport 1.0.3
To Next Page
Loading...
