Optimum OPTIdrill D26 Pro - Emergency stop button; Drill chuck guard; Protective cover of V-belt.

Safety
Version 1.0.3 - 2022-04-06 70 Translation of original instruction
D17 Pro│D23 Pro│D26 Pro│D33 Pro
EN
D17Pro_D23Pro_D26Pro_D33Pro_GB_1.fm
1.11 Emergency stop button
ATTENTION!
The drilling spindle keeps turning for a short time even after actuating the emergency
stop push button depending on the preset speed.
1.12 Drill chuck guard
Adjust the guard to the correct height before you start working.
To do so, slacken the clamping screw, set the required height and re-tighten the clamping
screw.
There is a switch integrated in the spindle protection mounting which monitors the closed posi-
tion.
INFORMATION
The machine cannot be started, if the drill chuck guard is not closed.
1.13 Protective cover of V-belt.
INFORMATION
The machine cannot be started, if the protective cover is not closed.