OPTIMUM
MASCHINEN - GERMANY
EC - Declaration of Conformity
in accordance with the Machinery Directive 2006/42/EC Annex II 1.A
The manufacturer /
distributor:
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
D - 96103 Hallstadt
hereby declares that the following product
Product designation: F3
Type designation: CNC milling machine
Serial number: __ __ __ __ __
Year of manufacture: 20__
CNC milling machine for craft and industrial plants which meets all the relevant provisions of the above
mentioned Directive 2006/42/EC as well as the other directives applied (below) including their amend-
ments in force at the time of declaration.
The following other EU Directives have been applied:
EMC Directive 2014/30/EC
Low Voltage Directive 2014/35/EC
The safety objective meet the requirement of EC Directive 2006/42/EC.
The following harmonized standards were applied:
EN ISO 12100:2010 - Safety of machinery - General principles for design - Risk assessment and risk
reduction
DIN EN 60204-1 - Safety of machines - Electrical equipment of machines, Part 1 General requirements
EN 12417 - Machine tools - Safety - Machining centres
DIN 66025-1, Publication date:1983-01 - Numerical control of machines; general requirements
DIN 66025-2, Publication date:1988-09 - Industrial automation; numerical control of machines, preparatory
and miscellaneous functions
Responsible for documentation: Kilian Stürmer, phone: +49 (0) 951 96555-800
Address: Dr.-Robert-Pfleger-Str. 26
D - 96103 Hallstadt
Kilian Stürmer
Hallstadt, 19/05/2015
To Next Page
Loading...
