OPTIMUM
MASCHINEN - GERMANY
Assembly and commissioning
Version 1.0 dated 2015-05-27 Page 26 Original operating instructions
F3GB
Lift the CNC machine carefully from the pallet of the transportation box by means of a crane
or a fork-lift truck.
"Total weight [kg]“ on page 21.
Bring the CNC machine with an appropriate handling device, e.g. Electric pallet truck or
fork-lift truck at their firm position.
Make sure that no add-on-pieces are damaged or cause paintwork is damaged during
transport.
WARNING!
The use of unstable lifting and load suspension equipment that might break under load
can cause severe injuries or even death.
"Machine mounting“ on page 28
3.3 Installation and assembly
3.3.1 Requirements regarding the installation site
Organize the working area around the CNC machine according to the local safety regulations.
The working area for operating, maintenance and repair must not be restricted. Follow the pre-
scribed safety areas and escape routes according to VDE 0100 part 729 as well as the environ-
mental conditions for the operation of the CNC machine.
INFORMATION
The main switch of the CNC machine must be freely accessible.
To Next Page
Loading...
