Optimum Optimill F3 - Tools and Tool Holding Fixtures

OPTIMUM
MASCHINEN - GERMANY
Technical data
Version 1.0 dated 2015-05-27 Page 23Original operating instructions
F3 GB
2.12 Tools and tool holding fixtures
CAUTION !
When using tools with larger diameters or at higher speeds!
The balancing of the tools has to amount to
 0 - 6000 min
-1
- G 6,3
 from a speed of 6000 min
-1
- G 2,5
according to DIN / ISO 1940.