OPTIMUM
MASCHINEN - GERMANY
Safety
Version 1.0 dated 2015-05-27 Page 6 Original operating instructions
F3GB
1 Safety
This part of the operating instructions
explains the meaning and use of the warning notes included in these operating instructions,
defines the intended use of the CNC machine ,
points out the dangers that might arise for you or others if these instructions are not
observed,
informs you about how to avoid dangers.
In addition to these operation instructions, please observe
the applicable laws and regulations,
the statutory provisions for accident prevention,
the prohibition, warning and mandatory signs as well as the warning labels on the CNC
machine.
Always keep this documentation close to the CNC machine.
If you would like to order another documentation for your CNC machine, please indicate the
serial number of your CNC machine. The serial number is printed on the type plate.
1.1 Type plate
1.2 Glossary of symbols
provides further instructions
calls on you to act
enumerations
To Next Page
Loading...
