Delta Elec. Inc. ES522 & EX532
Company Confidential Optoma___________________ Delta________________
76
2009/06/30
Note: The Flash-Tool will validate the signature of the binary image file for upgrading. The “Start” button will not
enable if the binary image is not a valid projector firmware.
Step 6: Press the “Start” button to update the flash with the chosen firmware. A warning message box will
appear for confirmation. Press <OK> to continue.
Step 7: When the last warning message box appears, this is the last chance to cancel the update. Press “OK”
button to start the firmware update.
The “Start” button
To Next Page
Loading...
