English
37
User Controls
White Level : Allow user adjust White Level when inputting
SVideo or Video/CVBS signals.
Black Level : Allow user adjust Black Level when inputting
SVideo or Video/CVBS signals.
Saturation : Adjust a video image from black and white to fully
saturated color. Press the to decrease the amount of color in
the image. Press the to increase the amount of color in the
image.
Hue : Adjust the color balance of red and green. Press the
to increase the amount of green in the image. Press the to
increase the amount of red in the image.
IRE : Adjust measurement of composite video signals.
Color Space
Select an appropriate color matrix type from RGB or YCbCr.
Reset
Return the adjustments and settings to factory default values.
Current : Return the current menu’s settings to factory default.
All : Return the settings for all menus to factory default values.
“IRE” is only supported
on NTSC signal.
To Next Page
Loading...
