optris CT - Page 12

-12 -
CT 3M
3ML
50 to 400 °C
2,3 µm
metals at low object temperatures (from 50 °C)
3MH
100 to 600 °C
3MH1
150 to 1000 °C
3MH2
200 to 1500 °C
3MH3
250 to 1800 °C
CT 4M
4ML
0 to 500 °C
2.2-6 µm
metals at low object temperatures (from 0 °C) and
very fast processes
CT G5
G5L
100 to 1200 °C
5,0 µm
measurement of glass
G5H
250 to 1650 °C
CT P3
P3
50 to 400 °C
3,43 µm
temperatures of thin film plastics
CT P7
P7
0 to 710 °C
7,9 µm
In the following chapters of this manual you will find only the short model codes.
On the 1M, 2M, 3M, 4M and G5 models the whole measurement range is split into several sub ranges (L, H, H1
etc.).
w ww . . co m
information@itm.com1.800.561.8187