Figure 4-20 Connecting and routing the Workstation 8 Series power supply
cable
7. Connect your country-specific power cord to the Workstation 8 Series power
supply. Ensure the power cord is fully inserted into the power supply socket.
8. Plug the power cord into a power outlet, and then touch the power button for two
seconds to power on the Workstation 820.
Initial Workstation Startup – Microsoft Windows 10
The first time you start your workstation you must complete the Microsoft Windows 10
operating system setup.
1. Complete the Microsoft Windows setup by following the prompts. Consult your
network administrator for help with configuring network and system settings.
2. Ensure your workstation is connected to a secure network.
3. Install the Client Application Loader (CAL) by double-tapping the CALClient
Installer icon and following the prompts. Upon successful completion, the
workstation is connected to your application’s CAL server. For more information,
refer to the latest version of the Oracle Hospitality Simphony Client Deployment
Guide on the Oracle Help Center at https://docs.oracle.com/en/industries/food-
beverage/.
Chapter 4
Initial Workstation Startup – Microsoft Windows 10
4-14
To Next Page
Loading...
Need help?
General
