Oracle MICROS 820 - Input;Output (IO) Panel and Ports

Table 2-1 (Cont.) Oracle MICROS Workstation 820 System Unit Basic Features
Feature Description
5. Stand Information Contacts Contact points used to transmit stand-specic information,
including part and serial numbers.
Workstation 820 System Unit Input/Output (IO) Panel
The Workstation 820 system unit IO panel includes ports for power, network
connectivity, and peripherals.
Note:
The Workstation 820 ships with protective covering installed over the
Network and USB (CFD) ports. It is not necessary to remove the protective
covering unless the ports will be used. If required, remove the protective
covering by peeling from the end.
Figure 2-2 Workstation 820 System Unit IO Panel
Table 2-2 Workstation 820 System Unit IO Panel Ports
Port Description
Power In • For congurations without the Peripheral Expansion Module:
Connect the included MICROS power adapter to the Power In
port.
• For congurations with the Peripheral Expansion Module: Connect
cable from Workstation 820 Power In port to the Peripheral
Expansion Module System port. The cable provides necessary
connectivity for power and IO ports.
Network
Lets you connect the Workstation 820 system unit to a wired network
via the Ethernet adapter cable for Oracle MICROS Workstation 8
Series.
Note: It is not necessary to remove the protective cover from the
Network port if wireless networking or the Peripheral Expansion
Module will be used.
Chapter 2
Workstation 820 System Unit Input/Output (IO) Panel
2-4