Need help?Do you have a question about the Oracle MICROS 6 Series and is the answer not in the manual?
Defines the intended audience for the setup guide.
Explains symbols used in the document and general cautions.
Provides contact information and details for Oracle Customer Support.
Links to Oracle Hospitality product documentation.
Lists changes made to the document over time.
Explains how to identify different workstation configurations using indicators.
Details the ports available on the primary I/O panel of the workstation.
Describes the internal ports and connectors on the workstation.
Explains the features and purpose of the adjustable stand for the workstation.
Details scenarios for changes in workstation power management states.
Details features of the Windows Embedded 8.1 OS for the Workstation 610.
Describes features of the Windows 10 IoT Enterprise OS for Workstation 6.
Explains the Oracle Linux for MICROS OS and its features.
Lists components of the Workstation 6 platform software.
Step-by-step guide to remove the adjustable stand cover.
Details how to find the hex key and security screws for setup procedures.
Instructions on how to properly secure the adjustable stand cover.
Guide to securing the I/O panel cover for the workstation.
Steps to properly secure the workstation to its adjustable stand.
Procedure to attach the Epson PS-180 power supply to the stand.
Instructions for mounting the workstation display to a wall.
Guide for mounting the workstation display using a VESA mount.
Guide for installing the optional wireless networking module.
Instructions for adding or replacing memory modules (RAM) in the workstation.
Explains the different modes of the Magnifier accessibility feature.
Describes various options and behaviors for the on-screen keyboard.
Explains the Narrator feature for screen reading.
Details how to use speech recognition for voice control.
Steps to launch the workstation's diagnostic utility.
How to view system diagnostic information using the utility.
Procedures for testing the LCD display features like brightness and color.
How to test the integrated magnetic stripe reader.
How to test cash drawer open/close functionality.
Guide for performing an RS232 loopback test.
How to view and control hardware settings like USB ports and voltage.
Steps to launch the BIOS configuration utility.
How to view system information within the BIOS utility.
Details on configuring BIOS security settings like passwords.
How to set the boot order for devices in the BIOS.
Information on advanced BIOS configuration options.
Provides dimensions for the workstation with its adjustable stand.
Provides dimensions for the 10-inch customer display with a pole mount.
Provides dimensional information for wall mounting the workstation.
Describes the various connectors on the workstation's I/O panel.
Presents system block diagrams for different workstation configurations.
Offers solutions for common problems encountered with the workstation.
Step-by-step instructions for safely disconnecting the workstation.
Guide on how to disassemble the workstation for service or configuration.
Instructions for reassembling the workstation after service.
Explains the purpose and process of system recovery.
Lists safety compliance statements and precautions.
Provides a warning regarding battery handling and replacement.
Instructions and warnings about removing and replacing the system unit cover.
General advice on caring for and handling the workstation.
To Next Page
General