Securing the Workstation to the Adjustable Stand
The adjustable stand is a mounting option for each configurations of the Workstation 6
Series. When using this option, ensure that the workstation is properly secured to the
adjustable stand.
1. Place the workstation adjustable stand on its back and connect the AC power
cable from the wall outlet.
2. Place the Adjustable Stand upright.
3. Tilt back the Adjustable Stand mount.
4. Place the workstation on the mount so that the nubs rest on the mount.
Chapter 6
Securing the Workstation to the Adjustable Stand
6-7
To Next Page
Loading...
Need help?
General
