Table 9-1 (Cont.) BIOS Security Settings
Setting Description of Option
TPM Action Select one of the options.
For the 610, the following options are
available:
• No change
• Enable
• Disable
• Activate
• Deactivate
• Clear
• Enable and Activate
• Disable and Deactivate
• Set Owner Install, with state=True
• Set Owner Install, with state=False
• Enable, Activate, and Set Owner Install
with state=True
• Disable, Deactivate, and Set Owner Install
with state=False
• Clear, Enable, and Activate
• Require PP for provisioning
• Do not require PP for provisioning
• Require PP for clear
• Do not require PP for clear
• Enable, Activate, and Clear
• Enable, Activate, Clear, Enable, and
Activate
For the 620 and 650, the following options are
available:
• No change
• Require PP for clear
• Do not require PP for clear
• Change EPS
Omit Boot Measurements Enable or Disable recording boot device
attempts in PCR.
Configuring the Boot Priority for Devices
On the Boot tab, use the arrow keys to reorder the priority list for boot devices. The
BIOS reads the devices from top to bottom in determining the method for booting into
the operating system.
For example, if you want the workstation to boot from a DVD whenever a user inserts
a disc and the HDD installation when there is no operating system disc, make sure to
place the DVD device, such as USB DVD, higher on the list than the HDD with the
operating system installation, such as ATA HDD0.
Exiting the BIOS Configuration Utility
On the Exit tab, select one of the following options:
Chapter 9
Configuring the Boot Priority for Devices
9-3
To Next Page
Loading...
Need help?
General
