Need help?Do you have a question about the Oracle MICROS Workstation 6 and is the answer not in the manual?
General| Brand | Oracle |
|---|---|
| Model | MICROS Workstation 6 |
| Category | Touch terminals |
| Language | English |
Describes the intended reader for the setup guide.
Explains safety symbols and power indicators used throughout the document.
Provides contact information and what to include when requesting support.
Directs users to the Oracle Help Center for product documentation.
Lists changes made to the document over time.
Details the CPU specifications of the Workstation 6.
Describes the features of the Workstation 6 display.
Information about the 32GB slim SATA solid state drive.
Specifies the operating system supported by the workstation.
Details the magnetic card reader capabilities.
Mentions the secure booting feature with UEFI.
Explains the different power states of the Workstation 6.
Describes scenarios leading to power state transitions.
Lists and describes the ports on the primary I/O panel.
Details optional ports and the MICROS connectivity port.
Outlines the features provided by the adjustable stand.
Location for storing the printer power supply or expansion modules.
Where expansion modules can be placed.
Lists the key software components included with the workstation.
Steps to remove the adjustable stand cover.
Identifies the location of essential setup tools.
Instructions for mounting the workstation onto its stand.
Guide for installing an optional wireless networking module.
Steps for mounting the workstation display to a wall bracket.
Overview of the utility for testing and configuration.
How to launch the diagnostic tool.
How to view detailed system diagnostic information.
Procedures for testing the LCD screen features.
Steps to test the MSR's functionality.
How to test the MSR with encryption enabled.
Procedures for testing the customer display.
How to verify cash drawer operation and status.
Guide for performing an RS232 loopback test.
Steps for testing an RS232 printer connection.
How to perform an IDN loopback test.
Steps for testing an IDN printer.
How to view COM port diagnostic reports.
How to configure USB port voltage settings.
How to retrieve I2C device information.
Steps to access the BIOS setup utility.
How to view system details within the BIOS.
Instructions for configuring BIOS security options.
How to set the boot order for devices.
Options for saving or discarding BIOS changes and exiting.
Details on advanced BIOS settings and their implications.
Description of various I/O panel connectors.
Pin reference for the IDN RS422/232 connector.
Pin reference for the powered RJ45 connector.
Pin reference and function for the Series 2 Cash Drawer.
Pin reference for the customer display port.
Lists components that can be removed from the system board.
Common problems and their solutions.
Steps to detach the workstation from its mount.
Instructions for taking the workstation apart.
Steps for putting the workstation back together.
How to perform system recovery using the Windows OS.
Steps to perform system recovery via the BIOS.
How to use the dedicated recovery button for system restore.
Detailed hardware and software specifications.
Physical dimensions of the workstation.
Details on power output and configuration for I/O ports.
Statements regarding regulatory compliance.
General safety advice for setting up and using the equipment.
Guidelines regarding equipment modifications.
Recommendations for product placement to prevent overheating.
Instructions and cautions for connecting the power cord.
Warnings related to battery handling and replacement.
Information about the system unit cover.
General care instructions for the workstation.
Specifics on where to place the workstation.
Precautions regarding EMI.
Instructions on how to clean different parts of the workstation.
Information on obtaining the Declaration of Conformity.
Information regarding RoHS compliance.
Details on product recycling programs.
Overview of compliance classes for different regions.
FCC Class A compliance statement.
FCC Class B compliance statement.
Canadian ICES-003 Class A notice.
Canadian ICES-003 Class B notice.
BSMI Class A compliance statement for Taiwan.
CCC Class A compliance statement for China.
Korean Class A compliance statement.
Korean Class B compliance statement.
Requirements for using shielded cables for connectivity.
To Next Page
